Popis předmětu - AE3B38MMP
Přehled studia |
Přehled oborů |
Všechny skupiny předmětů |
Všechny předměty |
Seznam rolí |
Vysvětlivky
Návod
| AE3B38MMP | Microprocessors and Microcontrollers in Instrumentation | ||
|---|---|---|---|
| Role: | Rozsah výuky: | 2P+2L | |
| Katedra: | 13138 | Jazyk výuky: | EN |
| Garanti: | Zakončení: | Z,ZK | |
| Přednášející: | Kreditů: | 6 | |
| Cvičící: | Semestr: | L | |
Webová stránka:
https://moodle.fel.cvut.cz/courses/a3b38mmpAnotace:
Applications of microprocessors and single chip microcontrollers in instrumentation techniques are presented in this course. The course is focused on describing function and programming in embedded applications.Osnovy přednášek:
| 1. | Microprocessor architecture, action blocks, microprocessor controlled instruments | |
| 2. | 8-bit microcontroller with 8051 core | |
| 3. | Instruction set of microprocessor, macroasembler, pseudoinstruction set | |
| 4. | Formal convention programming, program debugging | |
| 5. | Architecture of 32-bit microcontrollers with ARM7 and ARM-Cortex M3 core | |
| 6. | MOS ROM, PROM, EPROM, FLASH memory, storage cell | |
| 7. | R/W - SRAM, DRAM, SDRAM memory, double gate and multigate memory | |
| 8. | Microprocessor system bus, signals and timing | |
| 9. | Memory connection, I/O circuits, coders design | |
| 10. | Input/output connection, data transition, interrupt, DMA | |
| 11. | Programmable I/O circuits, watchdog | |
| 12. | Controls buttons, keyboard, rotary pads | |
| 13. | Displays, serial parallel connection, static and dynamic LED, LCD, CRT controlled | |
| 14. | A/D and D/A converters connection in microprocessors |
Osnovy cvičení:
| 1. | Assembler, debugger | |
| 2. | Programmable controlled serial channel design, binary control output | |
| 3. | Project 1 - Resistance to number converter design | |
| 4. | Project 1 - Circuits implementation in bread board | |
| 5. | Project 1 - Program design and debugging, arithmetic implementation | |
| 6. | Project 1 - Error analysis, results presentation | |
| 7. | Project 2 - Microprocessor controlled 4-digit integration AD converter design | |
| 8. | Project 2 - Circuits implementation in bread board | |
| 9. | Project 2 - Control program design, hardware activation | |
| 10. | Project 2 - Debugging, communication testing | |
| 11. | Project 2 - A/D converter measuring, results presentation | |
| 12. | Individual project 3 - Microprocessor controlled circuit with Atmel AT89S52 design | |
| 13. | Individual project 3 - Circuits implementation in bread board, program design | |
| 14. | Individual project 3 - Program debugging and results presentation, summary |
Literatura:
| [1] | Ziu, J.: The Definitive Guide to the ARM Cortex-M3. Elsevier, 2007, ISBN: 978-0-7506-8534-4 | |
| [2] | Sloss, A., Symes, D., Wright, Ch.: ARM System Developer's Guide. Elesevier 2004, ISBN 1-55860-874-5 |
Požadavky:
Předmět je zahrnut do těchto studijních plánů:
| Plán | Obor | Role | Dop. semestr |
| Stránka vytvořena 20.4.2024 12:52:08, semestry: Z/2024-5, Z,L/2023-4, připomínky k informační náplni zasílejte správci studijních plánů | Návrh a realizace: I. Halaška (K336), J. Novák (K336) |