Popis předmětu - BE5B34MIK

Přehled studia | Přehled oborů | Všechny skupiny předmětů | Všechny předměty | Seznam rolí | Vysvětlivky               Návod
BE5B34MIK Microcontrollers Rozsah výuky:2P+2L
Garanti:Janíček V. Role:P Jazyk výuky:EN
Vyučující:Janíček V., Teplý T. Zakončení:Z,ZK
Zodpovědná katedra:13134 Kreditů:6 Semestr:L

Anotace:

The goal of this course is to make students acquainted with recent interesting applications, smart sensors circuits and peripherals handled by microcontrollers. In a lab students will program their own application and measure its properties. Because of usage of a programming language C it will be possible to focus on the practical part of the realization.

Osnovy přednášek:

1. The basic terms of microprocessor techniques and architecture of microcontrollers, input/output settings, LED and push button control.
2. Programming microcontrollers in C language, development environment and its possibilities, time-division multiplexing, seven-segment displays, matrix keyboard.
3. Interrupt control operation, sources, interrupt vectors and priorities, incremental encoders.
4. Graphic, alphanumerical and LED display control touch panels, capacitive touch sensors.
5. Analog signal processing and control, AD and DA converters, voltage references.
6. Software and hardware timing.
7. Smart sensor applications, SPI, I2C, 1-Wire.
8. Instruction set, assembler language, program and data memory, direct and indirect addressing, program run control, pipelining, conditional and unconditional branching.
9. Communication between PC and microcontroller, USART, USB, RS-232, RS-422, RS-485.
10. Processing of measured data, look-up tables, number conversion.
11. Control and regulation of low power motors (DC, stepper and servomotors), capture and compare modules, PWM.
12. GSM and GPS applications, RF identification and wireless sensor data transfer (Bluetooth, ZigBee, WiFi, IR), AT commands.
13. Memory space extension, external memories and memory media.
14. Configuration bits, clock signal sources, software and hardware solution of complex system stability and security, how to program a microcontroller, bootloader.

Osnovy cvičení:

1. Introduction to the development environment, hardware and software switch debouncing, LED and push button control.
2. Matrix keyboard, seven-segment display, multiplex mode.
3. Interrupt control operation, priorities.
4. Graphic and alphanumerical displays.
5. AD converter applications, analog temperature sensor, DA converter.
6. Analog sensors (resistive touch panel, 3-axis accelerometer).
7. I2C communication (EEPROM, temperature and humidity sensor, proximity sensor).
8. SPI communication (pressure sensor, 3-axis gyroscope, DA convertor).
9. Microcontroller to PC communication (UART, RS232, USB).
10. RS-485 communication.
11. Stepper motors (including micro stepping), servomotors and DC motors applications.
12. RFID applications.
13. Data transfer via Bluetooth, ZigBee and WiFi.
14. GPS and GSM modules data receiving and processing, AT commands.

Literatura:

1. Robert B.Reese: Microprocessors From Assembly Language to C Using The PIC18Fxx2, Da Vinci Engineering Press, Hingham Massachusetts 2005
2. Brian W. Kernighan, Dennis M. Ritchie: The C Programming Language, Second Edition, Prentice Hall, Inc., 1988

Požadavky:

Webová stránka:

https://moodle.fel.cvut.cz/course/view.php?id=2154

Předmět je zahrnut do těchto studijních plánů:

Plán Obor Role Dop. semestr
BEECS Před zařazením do oboru P 4
BPEECS_2018 Před zařazením do oboru P 4


Stránka vytvořena 12.11.2019 17:50:40, semestry: Z,L/2020-1, L/2018-9, Z,L/2019-20, připomínky k informační náplni zasílejte správci studijních plánů Návrh a realizace: I. Halaška (K336), J. Novák (K336)
Za obsah odpovídá: doc. Ing. Ivan Jelínek, CSc.