Fakulta elektrotechnická

České vysoké učení technické v Praze

ČVUT v Praze

Popis předmětu - BE1M14TVM

Přehled studia | Přehled oborů | Všechny skupiny předmětů | Všechny předměty | Seznam rolí | Vysvětlivky               Návod
BE1M14TVM Theory and Application of Power Converters Rozsah výuky:2+2l
Garanti:Lettl J. Role:P Zakončení:Z,ZK
Vyučující:Lettl J.
Zodpovědná katedra:13114 Kreditů:5 Semestr:L

Anotace:

The course focuses on typical applications of power semiconductor converters on their sizing, switching and protection of power semiconductor converters. It also summarizes the basics of modulation and control strategies of power semiconductor converters and modern trends in their application in electric drives and other applications.

Obsah:

Course is focused on advanced semiconductor power converters and their applications in other areas than electric drives.

Osnovy přednášek:

1. Rectifiers with active load, discontinuous and continuous current mode
2. Three-phase bridge rectifier working at multiple commutation
3. Three-phase AC/AC converters, diagram of work at resistive load and at inductive load, backward influence
on the feeding network
4. Utilization of power semiconductor converters in non-drive applications, electrostatic separators, welding rectifiers,
battery chargers, superconductive magnetic energy reservoir, induction heating
5. Reactive power compensation, contactless switches for phase control and cycled control, softstarters
6. Resistor pulse control, cathodic and other types of prevention against electrochemical corrosion
7. Power transistor in switching mode, switch on and switch off processes, influence of the load type, limit values,
permissible operation area
8. Loss and lossless snubbers for switching off and snubber for switching on, realisation of the three-phase bridge
transistor voltage source inverter
9. Modern controlled drive, its components, function structure, control principles, pulse width modulation methods
10. Principle of vector control, basic structures, transformation of asynchronous machine equations to various
coordinate systems and used mathematical models
11. Principle of direct torque control, basic structures
12. Principle of pulse width modulated rectifiers, rectifiers with pulse width modulation of current type and with pulse
width modulation of voltage type
13. Control and design principles of matrix converters
14. Power semiconductor converter protection against current overload and against external and commutation
overvoltage

Osnovy cvičení:

1. Instructions to the labs, security directions, laboratory rules, laboratory identification, work with oscilloscope
2. One-phase controlled bridge rectifier with serial R+L load and parallel R+C load
3. Control of one-phase controlled bridge rectifier with variable resistive load to the constant current
4. Influence of the input leakage inductance on the commutation time of the three-phase bridge rectifier
5. Serial resonance bridge inverter
6. Parallel resonance bridge inverter
7. Compensation circuit with rectifier
8. Compensation circuit with AC/AC converter
9. Load current control by the AC/AC converter in transformer secondary circuit at resistive load
10. Load current control by the AC/AC converter in transformer secondary circuit at inductive load
12. Control of the system with indirect frequency converter including pulse width modulated voltage source inverter
11. Control of the system with pulse width modulated rectifier
13. Load current control by the AC/AC converter in transformer primary circuit at resistive load
14. Assesment

Literatura:

1. Ned Mohan, William P. Robbins, Tore M. Undeland: WIE Power Electronics: Converters, Applications and Design, Media Enhanced , 3rd Edition, John Wiley & Sons, Inc., New York, March 2003
2. Bimal K. Bose:Power Electronics and Variable Frequency Drives : Technology and Applications John Wiley & Sons, Inc. -IEEE Press, New York, September 1996
3. PRESSMAN, Abraham I., Keith H. BILLINGS a Taylor MOREY. Switching power supply design. 3rd ed. New York: McGraw - Hill, 2009. ISBN 978-0-07-148272-1.

Požadavky:

Presence at all laboratory tasks, elaboration of laboratory reports.

Poznámka:

Rozsah výuky v kombinované formě studia: 14p+6l

Předmět je zahrnut do těchto studijních plánů:

Plán Obor Role Dop. semestr
MEEEM2_2016 Elektrické stroje, přístroje a pohony P 2
CHYBNY_01 Technologické systémy P 2
MEEEM1_2016 Technologické systémy P 2
MEEEM3_2016 Elektroenergetika P 2


Stránka vytvořena 17.11.2017 17:47:23, semestry: L/2016-7, Z,L/2017-8, Z/2018-9, připomínky k informační náplni zasílejte správci studijních plánů Návrh a realizace: I. Halaška (K336), J. Novák (K336)
Za obsah odpovídá: doc. Ing. Ivan Jelínek, CSc.