Faculty of Electrical Engineering

Czech Technical University in Prague

CTU in Prague

13000 / 13113 - Publications - 2013

13000 / 13113 - Department of Electrotechnology

Publications 2013

Books, Book chapters and Lecture notes, Dissertations, Research reports, Unpublished lectures, Proceedings, Papers, Patents

Papers in WoS Journals

SCHOER, K., et al. Estimating Raw Material Equivalents on a Macro-Level: Comparison of Multi-Regional Input-Output Analysis and Hybrid LCI-IO. Environmental Science and Technology. 2013, 47(24), 14282-14289. ISSN 0013-936X.

KOVANDA, J. and J. WEINZETTEL. The importance of raw material equivalents in economy-wide material flow accounting and its policy dimension. ENVIRONMENTAL SCIENCE & POLICY. 2013, 29(29), 71-80. ISSN 1462-9011.

GALLI, A., et al. A Footprint Family extended MRIO model to support Europe's transition to a One Planet Economy. The Science of the Total Environment. 2013, 813-818. ISSN 0048-9697.

WOLF, P. and V. BENDA. Identification of PV solar cells and modules parameters by combining statistical and analytical methods. Solar Energy. 2013, 93 151-157. ISSN 0038-092X.

WEINZETTEL, J., et al. Affluence drives the global displacement of land use. Global Environmental Change-Human and Policy Dimensions. 2013, 23(2), 433-438. ISSN 0959-3780.

SEDLÁČEK, J., et al. Dielectric properties of CaTiO3 coatings prepared by plasma spraying. Surface Engineering. 2013, 29(5), 384-389. ISSN 0267-0844.

CTIBOR, P., et al. Microstructure and Properties of Plasma-Sprayed Mixture of Cr2O3 and TiO2. Journal of Thermal Spray Technology. 2013, 22(7), 1163-1169. ISSN 1059-9630.

CTIBOR, P., et al. Phase Stabilization in Plasma Sprayed BaTiO3. Ceramics International. 2013, 39(5), 5039-5048. ISSN 0272-8842.

Patents

PAPEŽ, V. KOMPENZOVANÁ VYSOKOFREKVENČNÍ MATICOVÁ ZÁTĚŽ. Czech Republic. Utility Model. CZ 25340. 2013-05-06. Available from: http://isdv.upv.cz/portal/pls/portal/portlets.pta.det?pskup=2&propv=2013&pcipv=27649

PAPEŽ, V. Půdní mrazoměr. Czech Republic. Patent. CZ 304000. 2013-06-26. Available from: http://isdv.upv.cz/portal/pls/portal/portlets.pta.det?pskup=1&propv=2012&pcipv=803

BOUDA, V. ELECTROMECHANICAL TRANSDUCER. Japan. Patent. JP5380076. 2013-10-04. Available from: http://www4.ipdl.inpit.go.jp/Tokujitu/tjsogodben.ipdl?N0000=115

PAPEŽ, V. and P. HRZINA. Zařízení pro samočinné řízení a nastavování výkonových aktivních prvků, zejména u výkonových polovodičových zesilovačů. Czech Republic. Patent. CZ 303920. 2013-05-15. Available from: http://isdv.upv.cz/portal/pls/portal/portlets.pta.det?pskup=1&propv=2009&pcipv=412

PAPEŽ, V. Zařízení pro automatické testování výkonových kondenzátorů. Czech Republic. Utility Model. CZ 25418. 2013-05-23. Available from: http://isdv.upv.cz/portal/pls/portal/portlets.pta.det?pskup=2&propv=2013&pcipv=27419

PAPEŽ, V. Půdní mrazoměr. Czech Republic. Utility Model. CZ 25085. 2013-03-14. Available from: http://isdv.upv.cz/portal/pls/portal/portlets.pta.det?pskup=2&propv=2012&pcipv=27041

PAPEŽ, V. Bezkontaktní indikátor elektrického výkonu procházejícího přívodní šňůrou.. Czech Republic. Patent. CZ 303999. 2013-06-26. Available from: http://isdv.upv.cz/portal/pls/portal/portlets.pta.det?pskup=1&propv=2012&pcipv=632

Papers in Other Journals

JEŽDÍK, P., et al. Možnosti využití RTG a CT diagnostiky (ne)jen v elektrotechnice - 4. část. DPS Plošné spoje od A do Z. 2013,(7), 62-63. ISSN 1804-4891.

ČERNÁ, L., et al. Diagnostics of PV Modules Using Time Domain Reflectometry. Transaction on Electrical Engineering. 2013, 2(4), 106-108. ISSN 1805-3386.

DUŠEK, K., et al. Influence of Humidity on Voids Formation inside the Solder Joint. Advanced Science, Engineering and Medicine. 2013,(5), 543-547. ISSN 2164-6627.

BOUDA, V. Artificial Bio-inspired Muscle. WorldWide ElectroActive Polymers - WW EAP. 2013, 15(29th Issue), 11. Available from: http://eap.jpl.nasa.gov

WOLF, P. and V. BENDA. Optimalizace fotovoltaického systému pro přípravu teplé vody. TZB info. 2013, 13 ISSN 1801-4399. Available from: http://elektro.tzb-info.cz/teorie-elektrotechnika/10697-optimalizace-fotovoltaickeho-systemu-pro-pripravu-teple-vody

POVOLOTSKAYA, E. and P. MACH. Affinity Diagram as a Risk Analysis Tool with Support of Fuzzy Logic. Advanced Science Letters. 2013, 19(8), 2391-2394. ISSN 1936-6612.

MACH, P., V. PAPEŽ, and D. BUŠEK. Current Loading of Adhesive Joints Aged in Environment with High Humidity. Advanced Science, Engineering and Medicine. 2013, 2013(6), 581-584. ISSN 2164-6627.

Books, Book Chapters and Lecture Notes

MOLHANEC, M., Michal BEJČEK, and Jan VORÁČEK, eds. SDOT 2013. Jihlava, 2013-11-08. Praha: Vysoká škola manažerské informatiky a ekonomiky, a.s., 2013. ISBN 978-80-86847-66-5.

BENDA, V. Photovoltaic Cell and Modules Theory and Technology (Chapter IV). In: KAPLANIS, S., et al., eds. Renewable Energy Systems: Theory, Innovations and Intelligent Applications. Hauppauge NY: Nova Science Publisher, Inc., 2013. pp. 287-345. Renewable Energy: Research, Development and Policies. ISBN 978-1-62417-741-5.

ZHURAVSKAYA, O., L. TARBA, and P. MACH, eds. New competitive advantage for companies - TLS methodology in combination of theory of constraints, Lean production and Six Sigma.. Odessa, 2013-10-03/2013-10-15. 2013. ISSN 2224-0187. Available from: http://www.sworld.com.ua/konfer32/638.pdf

KAPLANIS, S., et al., eds. Renewable Energy Systems: Theory, Innovations and Intelligent Applications. Hauppauge NY: Nova Science Publisher, Inc., 2013. Renewable Energy: Research, Development and Policies. ISBN 978-1-62417-741-5.

Conference Proceedings

MACH, P., M. KOCIAN, and J. KOLÁŘOVÁ. Study of Sputtering Process of Alumina Thin Films. In: Proceedings of the International Spring Seminar on Electronic Technology. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. New York: IEEE, 2013. pp. 247-252. ISSN 2161-2528. ISBN 9781479900367. DOI 10.1109/ISSE.2013.6648251.

COSTOPOULOU, T. and M. MOLHANEC. Evolution towards mobile government: the Greek and the Czech cases. In: 5th e-Democracy ’13 International Conference. 5th e-Democracy ’13 International Conference, Athens, 2013-12-05/2013-12-07. 2013.

DUŠEK, K., et al. Influence of type of reflow technology and type of surface finish on tomb stone effect. In: Book of Abstracts. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. Alba Iulia: 1 Decembrie 1918 University, 2013. pp. 132-135. 1st Edition 2013. ISBN 978-606-613-064-6. DOI 10.1109/ISSE.2013.6648229.

CTIBOR, P., et al. Plasma spraying of natural olivine and its dielectric, mechanical and optical characterization. In: 16th International Conference on Plasma Physics and Applications. 16th INTERNATIONAL CONFERENCE ON PLASMA PHYSICS AND APPLICATIONS, Magurele, Bucharest, 2013-06-20/2013-06-25. Bucharest: National institute for lasers, plasma and radiation physics, 2013. pp. 36. ISSN 2344-0481.

MACH, P. and T. ROZKOŠNÝ. Ageing of Tunnel Junctions Formed in Oxygen Plasma and in Air. In: Proceedings of the International Spring Seminar on Electronic Technology. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. New York: IEEE, 2013. pp. 152-156. ISSN 2161-2528. ISBN 9781479900367. DOI 10.1109/ISSE.2013.6648233.

BENDA, V. Photovoltaic cell and module physics and technology. In: The Innovetion Week on R.E.S., P.V. systems engineering and the other renewable energy systems and the entrepreneurship spirit. The Innovetion Week on R.E.S., Patras, 2013-07-01/2013-07-10. Patras: TEI Patras, 2013. ISBN 978-960-7801-24-1.

PLAČEK, M., D. BUŠEK, and P. MACH. Influence of nanoparticle additives on change of the glass transition temperature of electrically conductive adhesives. In: Electric Power Engineering 2013. Electric Power Engineering 2013, Kouty nad Desnou, 2013-05-28/2013-05-30. Ostrava: VŠB - Technical University of Ostrava, 2013. pp. 305-307. ISBN 978-80-248-2988-3.

MOLHANEC, M. OntoUML aneb ontologicky upřesněné UML. In: Datakon a Znalosti 2013. Znalosti 2013, Ostrava, 2013-10-13/2013-10-15. Ostrava: VŠB - Technická univerzita Ostrava, 2013. pp. 163-174. ISBN 978-80-248-3189-3.

PAPEŽ, V. and S. PAPEŽOVÁ. Frequency Compensated High Power Matrix Resistor Network. In: 2013 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Services. 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Services, Niš, 2013-10-16/2013-10-19. Beograd: IEEE - Jugoslovenskog IEEE, 2013. pp. 497-500. 1.. ISBN 978-1-4799-0899-8. DOI 10.1109/TELSKS.2013.6704426.

PIKNA, P. Stať ve sborníku z tuzemské mezinár. konf. cizojazyčně. In: POSTER 2013 - 17th International Student Conference on Electrical Engineering. 17th International Student Conference on Electrical Engineering, Prague, 2013-05-16. Prague: Czech Technical University, 2013. pp. 1-3. ISBN 978-80-01-05242-6.

KOTLAN, J., P. CTIBOR, and Z. PALA. Plasma Sprayed and Annealed Calcium Titanate Dielectrics. In: The Proceedings of the 1st International Porous and Powder Materials Symposium and Exhibition, PPM 2013. International Porous and Powder Materials Symposium and Exhibition, Izmir, 2013-09-03/2013-09-06. Izmir: University of Izmir, 2013. pp. 207-211. ISBN 978-975-6590-05-8.

BENDA, V. Diagnostics of photovoltaic power plants operation. In: The Innovetion Week on R.E.S., P.V. systems engineering and the other renewable energy systems and the entrepreneurship spirit. The Innovetion Week on R.E.S., Patras, 2013-07-01/2013-07-10. Patras: TEI Patras, 2013. ISBN 978-960-7801-24-1.

ČERNÁ, L., et al. DIAGNOSTIKA FOTOVOLTAICKÝCH MODULŮ S VYUŽITÍM STŘÍDAVÝCH METOD MĚŘENÍ. In: Sborník příspěvků z 8.ČFVK. 8. Česká fotovoltaická konference, Brno, 2013-05-14/2013-05-15. 2013.

ČERNÁ, L., et al. Ekonomické a technologické trendy ve fotovoltaice. In: Sborník odborná konference Aktuální otázky a vybrané problémy řízení elektrizačn soustavy. PODĚBRADY 2013 - Aktuální otázky a vybrané problémy řízení elektrizační soustavy - 18. ročník, Poděbrady, 2013-11-19/2013-11-20. Praha: EGÚ Praha Engineering a.s., 2013. ISBN 978-80-87774-10-6.

BENDA, V. Experience from PV system performence including comparison of on-roof and façade systems. (Case study on BIPV systems.). In: The Innovetion Week on R.E.S., P.V. systems engineering and the other renewable energy systems and the entrepreneurship spirit. The Innovetion Week on R.E.S., Patras, 2013-07-01/2013-07-10. Patras: TEI Patras, 2013. ISBN 978-960-7801-24-1.

MOLHANEC, M. Model based FMEA method for solar modules. In: 36th International Spring Seminar on Electronics Technology. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. New York: IEEE, 2013. pp. 183-188. ISSN 2161-2528. ISBN 978-1-4799-0036-7. DOI 10.1109/ISSE.2013.6648239.

MACH, P. and M. PLAČEK. Influence of Filler Concentration on Frequency Dependence of Electrically Conductive Adhesive Joints Impedance. In: SIITME 2013. 19th International Symposium for Design and Techn ology in Electronic Packaging, Galati, 2013-10-24/2013-10-27. Bucharest: University of Bucharest Publishing House, 2013. pp. 79-82. ISBN 978-1-4799-1555-2. DOI 10.1109/SIITME.2013.6743648.

MACH, P., et al. Diagnostic of Electrical Properties of Electrically Conductive Adhesives. In: Diagnostika 2013. Diagnostika 2013 - Conference on Diagnostics in Electrical Engineering CDEE 2013, Pilsen, 2013-09-02/2013-09-04. Pilsen: University of West Bohemia, 2013. pp. 14-17. ISBN 978-80-261-0210-6.

BESHAJOVÁ PELIKÁNOVÁ, I. and J. URBÁNEK. THE INFLUENCE OF SCREEN PRINT PARAMETERS ON DEPOSITED THICK FILM LAYER. In: HEGR, OH, ed. Proceedings - Electronic Devices and Systems - EDS '13. Electronic Devices and Systems, Brno, 2013-06-26/2013-06-27. Brno: VUT v Brně, Fakulta elektrotechniky a komunikačních technologií, 2013. pp. 120-124. ISBN 9788021447547.

DUŠEK, K., D. RŮŽIČKA, and I. BESHAJOVÁ PELIKÁNOVÁ. MEASUREMENT OF SOLDER ALLOYS SOLDERABILITY ON COPPER SAMPLES WITH DIFFERENT THERMAL CAPACITY. In: HEGR, OH, ed. Proceedings - Electronic Devices and Systems - EDS '13. Electronic Devices and Systems, Brno, 2013-06-26/2013-06-27. Brno: VUT v Brně, Fakulta elektrotechniky a komunikačních technologií, 2013. pp. 146-149. ISBN 9788021447547.

PAPEŽ, V. and S. PAPEŽOVÁ. Low Level Phase Noise Measurement Techniques. In: 2013 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Services. 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Services, Niš, 2013-10-16/2013-10-19. Beograd: IEEE - Jugoslovenskog IEEE, 2013. pp. 493-496. 1.. ISBN 978-1-4799-0899-8. DOI 10.1109/TELSKS.2013.6704425.

MACH, P. and J. JANÁK. Testing of Usability of Tabbing Ribbons Adhesive Assembly in PV Modules Production. In: Proceedings of the International Spring Seminar on Electronic Technology. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. New York: IEEE, 2013. pp. 85-89. ISSN 2161-2528. ISBN 9781479900367. DOI 10.1109/ISSE.2013.6648220.

JANIŠ, R. and J. KUBA. Power Devices Cooling Using Heat Pipes. In: Diagnostika 2013. Diagnostika 2013 - Conference on Diagnostics in Electrical Engineering CDEE 2013, Pilsen, 2013-09-02/2013-09-04. Pilsen: University of West Bohemia, 2013. pp. 26-30. ISBN 978-80-261-0210-6.

DOUBEK, J., et al. Behaviour of Ferrofluidic Liquid in Heat Pipe Affected by External Magnetic Field. In: ISTET 2013. ISTET 2013, Plzeň, 2013-06-24/2013-06-26. Plzeň: ZČU Plzeň, 2013. pp. I11-I12. ISBN 978-80-261-0246-5.

ŽÁČEK, J. and K. KÜNZEL. Technické požadavky na zařízení elektrických pohonů. In: XXXIII. celostátní konference o elektrických pohonech. XXXIII. celostátní konference o elektrických pohonech, Plzeň, 2013-06-11/2013-06-13. 2013. ISBN 978-80-02-02457-6.

PLAČEK, M. and P. MACH. Monitoring of Metalized Film Capacitors Degradation with Impedance Nonlinearity Measurement. In: SIITME 2013. 19th International Symposium for Design and Techn ology in Electronic Packaging, Galati, 2013-10-24/2013-10-27. Bucharest: University of Bucharest Publishing House, 2013. pp. 263-266. ISBN 978-1-4799-1555-2. DOI 10.1109/SIITME.2013.6743687.

MACH, P. Electrically Conductive Adhesives Usability for Power Electronic Packaging. In: Diagnostika 2013. Diagnostika 2013 - Conference on Diagnostics in Electrical Engineering CDEE 2013, Pilsen, 2013-09-02/2013-09-04. Pilsen: University of West Bohemia, 2013. pp. 18-21. ISBN 978-80-261-0210-6.

MOLHANEC, M. Agile Product Design - A modern approach to quality improvement. In: 36th International Spring Seminar on Electronics Technology. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. New York: IEEE, 2013. pp. 178-182. ISSN 2161-2528. ISBN 978-1-4799-0036-7. DOI 10.1109/ISSE.2013.6648238.

DUŠEK, K., J. VÁVRA, and A. RUDAJEVOVÁ. Effect of reflow technology and surface finishes of PCB on solder spreading. In: Proceedings of the International Spring Seminar on Electronic Technology. 36th International Spring Seminar on Electronics Technology "Automotive Electronics", Alba Iulia, 2013-05-08/2013-05-12. New York: IEEE, 2013. pp. 136-139. ISSN 2161-2528. ISBN 9781479900367. DOI 10.1109/ISSE.2013.6648230.

ŽÁK, P., M. PLAČEK, and P. HROUDA. Diagnostics of Whiskers Using Expert System. In: Electric Power Engineering 2013. Electric Power Engineering 2013, Kouty nad Desnou, 2013-05-28/2013-05-30. Ostrava: VŠB - Technical University of Ostrava, 2013. pp. 309-311. ISBN 978-80-248-2988-3.

Research Reports

LOYO PRADO, M. and L. ČERNÁ. Application of alternate methods of measurement of PV modules. 2013.

HRZINA, P., et al. Metodický pokyn k postupu identifikace stupně poškození PV modulů požárem. 2013.

URBÁNEK, J. Závěrečná zpráva - Technické komise CLC/SC 40, 40XA, 40XB - rezistory, kondenzátory. 2013. 13113/10/2013.

MACH, P., V. PAPEŽ, and M. HORÁK. Návrh a vývoj zařízení, studie a měření spolehlivostních parametrů kondenzátorů II. 2013.

DUŠEK, K., et al. Analýza parametrů součástek elektroměrů s ohledem na klimatické podmínky. 2013.

VODRÁŽKA, J., et al. Analýza kvality provedení a součástkové základny elektroměrů - metodika a soubor testů. 2013.

HOLKUP, T., et al. DV#5 (2013-1) Znalostní báze pro provádění analýz životního cyklu (LCA). 2013. V-13-071.

DUŠEK, K. RTG defektoskopie vadných snímačů PZN-1. 2013.

BOUDA, V. and K. BUHR. Vývoj stykového transformátoru DT-075F s kompozitní silikátovou zalévací látkou pro zvýšené proudové zatížení. 2013. 2012.

HRZINA, P., et al. Test teplotní odolnosti TF PV modulů. 2013.

PAVELKA, J., et al. Znalecký posuek technologického stavu malé vodní elektrárny Brandýs nad Labem. 2013. VZ332/K314/13.

CAVENAGHI, G.L.C. and M. MOLHANEC. Construction and Operation of Photovoltaic Modules, a Degradation Search Using an FMEA Application Concerning an Ontology Based Model. 2013. 13 113/3/2013.

WEINZETTEL, J., T. HOLKUP, and I. KUDLÁČEK. Environmentální inventura slévárny. 2013. V-13-079.

DUŠEK, K. and J. VODRÁŽKA. Obrazová a RTG inspekce stavu elektorměrů. 2013.

DUŠEK, K. Diagnostika residuí na pájecích ploškách. 2013.

Unpublished Lectures

MOLHANEC, M. and V. MERUNKA. ICT user’s knowledge In the Czech Republic (regional perspective). Unpublished Lecture. Informatics Laboratory, Agricultural University of Athens. 2013-06-12.

BOUDA, V. and K. REZKOVÁ. Grafén. Unpublished Lecture. Český rozhlas - Radiožurnál. 2013-01-29.

The page was created 23.11.2017 05:00:01
Responsible person: doc. Ing. Milan Polívka, Ph.D.