13000 / 13114 - Publications - 2017

13000 / 13114 - Department of Electric Drives and Traction

Publications 2017

Papers in WoS Journals

PICHLÍK, P. and J. ZDĚNEK. Train Velocity Estimation Method Based on an Adaptive Filter with Fuzzy Logic. Journal of Electrical Engineering. 2017, 2(68), 125-131. ISSN 1335-3632. DOI 10.1515/jee-2017-0017.

FÁBERA, V., T. MUSIL, and J. ŘADA. The first hardware MSC algorithm implementation. Neural Network World. 2017, 27(6), 541-555. ISSN 1210-0552. DOI 10.14311/NNW.2017.27.029.

PENIAK, A., et al. Design and optimization of switched reluctance motor for electrical vehicles. Electrical Engineering. 2017, 99(4), 1393-1401. ISSN 0948-7921. DOI 10.1007/s00202-017-0621-4.

Patents

České vysoké učení technické v Praze, Praha 6, CZ. Pohyblivá naklápěcí hasicí tryska. Inventors: P. PECHOVÁ, et al. Czech Republic. Utility Model CZ 30396. 2017-02-28. Available from: https://isdv.upv.cz/webapp/webapp.pts.det?xprim=10208849&lan=cs&s_majs=&s_puvo=&s_naze=&s_anot=

Papers in Other Journals

ČEŘOVSKÝ, Z. Problémy elektromobility. Elektro. 2017, 2017(3), 94-99. ISSN 1210-0889.

THÖNDEL, E. Interactive Motion Platforms and Virtual Reality for Vehicle Simulators. Acta Polytechnica CTU Proceedings. 2017, 12(1), ISSN 2336-5382. Available from: https://ojs.cvut.cz/ojs/index.php/APP/article/view/4033

KARLOVSKÝ, P. and J. LETTL. Application of MRAS algorithm to replace the speed sensor ininduction motor drive system. Procedia Engineering. 2017, 192(1), 421-426. ISSN 1877-7058. DOI 10.1016/j.proeng.2017.06.073.

PAVELKA, J. Renesance synchronních reluktančních motorů. Elektro. 2017, 27(8-9), 60-64. ISSN 1210-0889.

VITNER, J., J. PAVELKA, and J. LETTL. Combined Magnetic Bearing - Magnetic Bearing Using Active and Passive Magnetic Fields. Journal of Electrical Engineering. 2017, 17 24-27. ISSN 1582-4594.

KARLOVSKÝ, P. and J. LETTL. Predictive Control of Induction Motor Drive Using dSPACE Platform. Transaction on Electrical Engineering. 2017, 6(2), 44-48. ISSN 1805-3386.

Conference Proceedings

KOŠŤÁL, M. and T. KOŠŤÁL. Comparison of two Approaches to FPGA Based Sinusoidal PWM Generators for Electric Power Frequency Converters. In: Recenzovaný sborník Mezinárodní Masarykova konference pro doktorandy a mladé vědecké pracovníky 2017. Mezinárodní Masarykova konference pro doktorandy a mladé vědecké pracovníky 2017, Praha, 2017-12-18/2017-12-20. Hradec Králové: Akademické sdružení MAGNANIMITAS, 2017. p. 1079-1086. vol. VII. ISBN 978-80-87952-22-1.

SKAROLEK, P. and J. LETTL. Current Limiting Driver for GaN Half-Bridge. In: 22nd 2017 International Conference on Applied Electronics. 22nd International Conference Applied Electronics 2017, Pilsen, 2017-09-05/2017-09-06. Pilsen: University of West Bohemia, 2017. p. 227-230. ISSN 1803-7232. ISBN 978-80-261-0641-8. DOI 10.23919/AE.2017.8053619.

KLÁN, M. Modelling of Trolleybuses in Environment MATLAB/Simulink. In: Proceedings of the International Student Scientific Conference Poster – 21/2017. Poster 2017, Praha, 2017-05-23. Praha: Czech Technical University in Prague, 2017. ISBN 978-80-01-06153-4.

SCHMIDOVÁ, N. and R. FAJTL. Modeling of Electrical Resistance Measuring Method for Sensing Damage and Deformation in CFRP Composites. In: Sborník konference TECHSOFT ENGINEERING ANSYS 2017 Setkání uživatelů a konference. TECHSOFT ENGINEERING - ANSYS 2017 - Setkání uživatelů a konference, Orea Resort Devět Skal, 2017-05-24/2017-05-26. Praha 4: TechSoft Engineering, 2017. ISBN 978-80-905040-7-3.

HAUBERT, T., et al. Automated Driving Cycle Simulation and Measurement System based on dSpace DS1103. In: BYRON, P., ed. 24 th Annual Conference Proceedings Technical Computing Prague 2017. Technical Computing Prague 2017, Praha, 2017-11-08. Praha: HUMUSOFT s.r.o., 2017. p. 1-37. ISSN 2336-1662. ISBN 978-80-7592-002-7.

VONDŘICH, J. and J. LETTL. Modelování utlumení vibrací elektrických strojů. In: Sborník 22. odborné konference Aktuální otázky a vybrané problémy řízení elektrizačních soustav. Aktuální otázky a vybrané problémy řízení elektrizačních soustav, Poděbrady, 2017-05-23/2017-05-24. Praha: EGÚ Praha Engineering, a.s., 2017. ISBN 978-80-87774-51-9.

KARLOVSKÝ, P. and J. LETTL. Influence of Switching Frequency on Torque Ripples in Model Predictive Control of Induction Motor Drive. In: Proceedings of the 2017 9th International Conference on Electronics, Computers and Artifical Intelligence (ECAI). Electronics, Computers and Artificial Intelligence, Targoviste, Romania, 2017-06-29/2017-07-01. New York: IEEE, 2017. ISSN 2378-7147. ISBN 978-1-5090-6458-8. DOI 10.1109/ECAI.2017.8166398.

KOŠŤÁL, T. Influence of the Rotor Resistance Change to Control Performance of an Induction Machine. In: Proceedings of the International Student Scientific Conference Poster – 21/2017. Poster 2017, Praha, 2017-05-23. Praha: Czech Technical University in Prague, 2017. p. 1-6. ISBN 978-80-01-06153-4.

PICHLÍK, P. and J. ZDĚNEK. Dependence of locomotive adhesion force estimation by a Kalman filter on the filter settingsv. In: TRANSCOM 2017, 12th International Scientific Conference Of Young Scientists On Sustainable, Modern and Safe Transport. TRANSCOM 2017, Horný Smokovec, 2017-05-31/2017-06-02. Linz: Elsevier BV, 2017. p. 695-700. ISSN 1877-7058. DOI 10.1016/j.proeng.2017.06.120.

SKAROLEK, P. GaN DC/DC Quazi Z-Source Converter for Electric Vehicles with Redox Flow Batteries. In: Proceedings of the International Student Scientific Conference Poster – 21/2017. Poster 2017, Praha, 2017-05-23. Praha: Czech Technical University in Prague, 2017. ISBN 978-80-01-06153-4.

VALOUCH, V., et al. Fault identification at microgrid-connected converter and its ride-through capability. In: Proceedings of the 9th International Scientific Symposium on Electrical Power Engineering ELEKTROENERGETIKA 2017. ELEKTROENERGETIKA 2017, Stará Lesná, 2017-09-12/2017-09-14. Košice: Technical University of Košice, 2017. p. 68-71. ISBN 978-80-553-3195-9.

PICHLÍK, P. Comparison of Different Kalman Filters Types Performance for a Locomotive Slip Control Purposes. In: Proceedings of the International Student Scientific Conference Poster – 21/2017. Poster 2017, Praha, 2017-05-23. Praha: Czech Technical University in Prague, 2017. ISBN 978-80-01-06153-4.

BAUER, J. Induction Machine Island Mode Working Generator with Matrix Converter. In: PROCEEDINGS OF THE 2017 18TH INTERNATIONAL SCIENTIFIC CONFERENCE ON ELECTRIC POWER ENGINEERING (EPE). 2017 18th International Scientific Conference on Electric Power Engineering (EPE), Kouty nad Desnou, 2017-05-17/2017-05-19. New York: IEEE, 2017. p. 156-160. ISSN 2376-5623. ISBN 978-1-5090-6406-9. DOI 10.1109/EPE.2017.7967326.

KOŠŤÁL, T. Optimisation of Power Consumption of Electric Drive With Induction Machine Through Online Parameter Identification. In: Proceedings | Research Track of the 8th Biannual CER Comparative European Research Conference. CER Comparative European Research 2017, London, 2017-10-30/2017-10-31. London: Sciemcee Publishing, 2017. p. 139-142. ISBN 978-0-9935191-6-1.

KARLOVSKÝ, P. and J. LETTL. Comparison of sensorless AC drive operation using MRAS method or Luenberger observer. In: Optimization of Electrical and Electronic Equipment (OPTIM) & 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 2017 International Conference on. Brasov, Romania, 2017-05-25/2017-05-27. IEEE, 2017. p. 281-286. ISBN 978-1-5090-4489-4. DOI 10.1109/OPTIM.2017.7974984.

VACERDA, M., P. MINDL, and Z. ČEŘOVSKÝ. Strategie využití superkapacitoru v hybridním pohonu. In: Sborník XXXV. celostátní konference o elektrických pohonech. XXXV. celostátní konference o elektrických pohonech, Plzeň, 2017-06-06/2017-06-07. Praha: ČSVTS, 2017. p. 1-155. ISBN 978-80-02-02724-9.

PICHLÍK, P. and J. ZDĚNEK. Locomotive Velocity Estimation for a Slip Control Purpose by an Unscented Kalman Filter. In: PROCEEDINGS OF THE 2017 18TH INTERNATIONAL SCIENTIFIC CONFERENCE ON ELECTRIC POWER ENGINEERING (EPE). 2017 18th International Scientific Conference on Electric Power Engineering (EPE), Kouty nad Desnou, 2017-05-17/2017-05-19. New York: IEEE, 2017. p. 34-38. ISSN 2376-5623. ISBN 978-1-5090-6406-9.

KLÁN, M. and J. LETTL. Modelování trolejbusů Škoda 9Tr a 24Tr v prostředí MATLAB/Simulink. In: PITTERMANN, M.P., ed. Sborník z XXXV konference o elektrických pohonech. XXXV. konference o elektrických pohonech, Plzeň, 2017-06-06/2017-06-07. Praha: Česká elektrotechnická společnost, 2017. p. 90-95. 1. vol. 1. ISBN 978-80-02-02724-9.

PAVELKA, J. Souhlasná napětí v technice proudových střídačů a jejich důsledky v praxi. In: Sborník XXXV. celostátní konference o elektrických pohonech. XXXV. celostátní konference o elektrických pohonech, Plzeň, 2017-06-06/2017-06-07. Praha: ČSVTS, 2017. p. 4-8. ISBN 978-80-02-02724-9.

KARLOVSKÝ, P. and J. LETTL. Improvement of DTC Performance Using Luenberger Observer for Flux Estimation. In: PROCEEDINGS OF THE 2017 18TH INTERNATIONAL SCIENTIFIC CONFERENCE ON ELECTRIC POWER ENGINEERING (EPE). 2017 18th International Scientific Conference on Electric Power Engineering (EPE), Kouty nad Desnou, 2017-05-17/2017-05-19. New York: IEEE, 2017. p. 136-140. ISSN 2376-5623. ISBN 978-1-5090-6406-9. DOI 10.1109/EPE.2017.7967286.

KOŠÍK, M., R. FAJTL, and J. LETTL. Theoretical evaluation of bifurcation in dependence on resonance frequency in two-coil inductive power transfer. In: 2017 International Conference on Applied Electronics. 22nd International Conference Applied Electronics 2017, Pilsen, 2017-09-05/2017-09-06. Pilsen: University of West Bohemia, 2017. p. 1-6. ISSN 1803-7232. ISBN 978-80-261-0641-8. DOI 10.23919/AE.2017.8053586.

PICHLÍK, P. and J. ZDĚNEK. Comparison of Locomotive Adhesion Force Estimation Methods for a Wheel Slip Control Purpose. In: Proceedings of the 2017 9th International Conference on Electronics, Computers and Artifical Intelligence (ECAI). Electronics, Computers and Artificial Intelligence, Targoviste, Romania, 2017-06-29/2017-07-01. New York: IEEE, 2017. ISSN 2378-7147. ISBN 978-1-5090-6458-8. DOI 10.1109/ECAI.2017.8166502.

BAUER, J. Output Voltage Estimation for Matrix Converter. In: 2017 International Conference on Applied Electronics. 22nd International Conference Applied Electronics 2017, Pilsen, 2017-09-05/2017-09-06. Pilsen: University of West Bohemia, 2017. ISSN 1803-7232. ISBN 978-80-261-0641-8. DOI 10.23919/AE.2017.8053574.

KARLOVSKÝ, P. and J. LETTL. Influence of speed and flux estimation by Luenberger observer on IM drive with DTC. In: 2017 International Conference on Applied Electronics. 22nd International Conference Applied Electronics 2017, Pilsen, 2017-09-05/2017-09-06. Pilsen: University of West Bohemia, 2017. p. 69-72. ISSN 1803-7232. ISBN 978-80-261-0641-8. DOI 10.23919/AE.2017.8053585.

SKAROLEK, P. and J. LETTL. Moderní modul řízení motoru pro Citroën Berlingo Electrique. In: PITTERMANN, M.P., ed. Sborník z XXXV konference o elektrických pohonech. XXXV. konference o elektrických pohonech, Plzeň, 2017-06-06/2017-06-07. Praha: Česká elektrotechnická společnost, 2017. 1. vol. 1. ISBN 978-80-02-02724-9.

KARLOVSKÝ, P. and J. LETTL. Application of MRAS algorithm to replace the speed sensor in induction motor drive system. In: TRANSCOM 2017, 12th International Scientific Conference Of Young Scientists On Sustainable, Modern and Safe Transport. TRANSCOM 2017, Horný Smokovec, 2017-05-31/2017-06-02. Linz: Elsevier BV, 2017. p. 421-426. ISSN 1877-7058. DOI 10.1016/j.proeng.2017.06.073.

KOŠÍK, M., R. FAJTL, and J. LETTL. Analysis of bifurcation in two-coil inductive power transfer. In: 18th Workshop on Control and Modeling for Power Electronics (COMPEL). Stanford university, Stanford, California, 2017-07-09/2017-07-12. IEEE (Institute of Electrical and Electronics Engineers), 2017. p. 1-8. ISSN 2151-0997. ISBN 978-1-5090-5326-1. DOI 10.1109/COMPEL.2017.8013324.

THÖNDEL, E. Modelling and Optimal Control with Energy Regeneration of a 6DOF Motion Platform with permanent Magnet Linear Actuators. In: European Simulation and Modelling Conference 2017. 31st European Simulation and Modelling Conference, Lisabon, 2017-10-25/2017-11-27. Ghent: EUROSIS - ETI, 2017. p. 373-377. ISBN 9789492859006.

PICHLÍK, P. and J. ZDĚNEK. Extended Kalman Filter Utilization for a Railway Traction Vehicle Slip Control. In: Optimization of Electrical and Electronic Equipment (OPTIM) & 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 2017 International Conference on. Brasov, Romania, 2017-05-25/2017-05-27. IEEE, 2017. p. 869-874. ISBN 978-1-5090-4489-4. DOI 10.1109/OPTIM.2017.7975079.

KOŠŤÁL, T. Offline Induction Machine Parameters Identification Suitable for Self-commissioning. In: 2017 International Conference on Applied Electronics. 22nd International Conference Applied Electronics 2017, Pilsen, 2017-09-05/2017-09-06. Pilsen: University of West Bohemia, 2017. p. 79-82. ISSN 1803-7232. ISBN 978-80-261-0641-8. DOI 10.23919/AE.2017.8053587.

KOŠŤÁL, T. Induction Machine Parameters Identification Method Suitable for Self-commissioning. In: 2017 XXVI International Scientific Conference Electronics (ET). XXVI International Scientific Conference Electronics - ET2017, Sozopol, 2017-09-13/2017-11-15. Sofia: IEEE, 2017. p. 261-264. ISBN 978-1-5386-1752-6.

MINDL, P., et al. HIL System for EV Drives Testing. In: MATUŠKO, J., ed. 2017 19th International Conference on Electrical Drives and Power Electronics (EDPE). Dubrovník, 2017-10-04/2017-10-06. Zagreb: KoReMa– Croatian Society for Communications, Comp.. Elect., Meas. and Contr., 2017. p. 1-361. ISBN 978-953-7992-09-5. Available from: http://www.edpe2017.fer.hr/

Research Reports

ZDĚNEK, J. Research Report JC2017-TCU-0027. [Research Report] 2017. Report no. JC2017-TCU-0027.

KOBRLE, P., T. KOŠŤÁL, and T. MUSIL. Research Report JC2017-TCU-0031. [Research Report] 2017. Report no. JC2017-TCU-0031.

MUSIL, T., et al. Research Report JC2017-TCU-0026. [Research Report] 2017. Report no. JC2017-TCU-0026.

LETTL, J. Doplnění studie napájecích zdrojů pro tokamak COMPASS-U (revize 1). [Research Report] Praha: CTU FEE. Department of Electric Drives and Traction, 2017. Report no. VZ470/K13114/17.

ZOUBEK, O., et al. Research Report JC2017-TCU-0035. [Research Report] 2017. Report no. JC2017-TCU-0035.

ZDĚNEK, J. Research Report JC2017-TCU-0047. [Research Report] 2017. Report no. JC2017-TCU-0047.

PAVELKA, J., et al. Assessing the feasibility of energy routers topologies. [Research Report] Praha 1: Ministerstvo školství, mládeže a tělovýchovy ČR, 2017. Report no. VZ469/K13114/17.

ZDĚNEK, J. Research Report JC2017-TCU-0030. [Research Report] 2017. Report no. JC2017-TCU-0030.

PAVELKA, J. and J. BAUER. Research Report JC2017-0101. [Research Report] 2017. Report no. JC2017-0101.

KARLOVSKÝ, P. and J. LETTL. Moderní způsoby řízení pohonu s asynchronním motorem. [Research Report] 2017. Report no. VZ471/K13114/17.

ZDĚNEK, J. Research Report JC2017-TCU-0029. [Research Report] 2017. Report no. JC2017-TCU-0029.

ZOUBEK, O. Research Report JC2016-TCU-0032. [Research Report] 2017. Report no. JC2016-TCU-0032.

PAVELKA, J. and J. ZDĚNEK. Research Report JC2017-0100. [Research Report] 2017. Report no. JC2017-0100.

ZOUBEK, O., et al. Research Report JC2017-TCU-0028. [Research Report] 2017. Report no. JC2017-TCU-0028.

ZOUBEK, O., et al. Research Report JC2016-TCU-0023. [Research Report] 2017. Report no. JC2016-TCU-0023.

PAVELKA, J., et al. Research Report JC2017-0102. [Research Report] 2017. Report no. JC2017-0102.

ZDĚNEK, J. Research Report JC2017-TCU-0037. [Research Report] 2017. Report no. JC2017-TCU-0037.

The page was created 29.03.2024 05:00:01
Responsible person: RNDr. Patrik Mottl, Ph.D.