Popis předmětu - AE0B38OCP

Přehled studia | Přehled oborů | Všechny skupiny předmětů | Všechny předměty | Seznam rolí | Vysvětlivky               Návod
AE0B38OCP Circuits of Digital Instruments
Role:  Rozsah výuky:2P+2L
Katedra:13138 Jazyk výuky:EN
Garanti:Holub J. Zakončení:Z,ZK
Přednášející:Holub J. Kreditů:5
Cvičící:Holub J., Kowalczuk Y. Semestr:L

Webová stránka:

https://moodle.fel.cvut.cz/courses/AE0B38OCP

Anotace:

Basic types of circuits and blocks of digital measuring instruments are described and analysed. Range and linearity for analogue circuits and interfaces for digital circuits are analysed in detail. Finally, individual projects including block design, model realisation and parameters verification are solved.

Výsledek studentské ankety předmětu je zde: AE0B38OCP

Osnovy přednášek:

1. General structure of digital measuring devices and signal generators
2. Directly coupled amplifiers and attenuators, insulating and modulating amplifiers
3. Mean value and RMS converters (knowledge extension to 38EM), peak detectors
4. Analogue time-continuous filters and filters with switched capacitors, oscillators, mixers
5. Reference voltage and current sources, harmonic and function generators
6. Relations between analogue measuring blocks - signal ranges, linearity and noise. Switching and coupling circuits
7. Time and amplitude signal discretisation, samplers, errors
8. Analogue-to-digital converters (knowledge extension to 38EM)
9. Digital-to-analogue converters, signal reconstruction
10. Frequency and phase digital measurement blocks, phase synchronization, direct digital synthesis
11. Interface circuits for standard buses and interfaces
12. Rules for design of analogue and digital parts from the point of view on electromagnetic compatibility
13. CAD of measuring circuits - simulation and its pros and cons
14. Blocks of virtual instrumentation, advantages and disadvantages of virtual instrumentation

Osnovy cvičení:

1. Introduction, safety, organization. Input circuits of measuring devices -
dynamic parameters
2. Input circuits of measuring devices - disturbance immunity
3. Generators of testing signal. Direct digital synthesis
4. Measuring voltage and current amplifiers
5. Mean value and RMS converters, non-linear amplifiers
6. Analogue time-continuous filters, switched capacitor based filters
7. Oscillators and mixers
8. Project - design of measuring block, model development and parameter
comparison with professional solution
9. Project: block design
10. Project: model part I 11. Project: model part II
12. Project: model part III
13. Project: parameter comparison with professional solution
14. Presentation and evaluation of individual projects' results

Literatura:

[1] Vedral, J., Fischer, J.: Elektronické obvody pro měřicí techniku, Vydavatelství ČVUT, Praha 2004 (in Czech)
[2] Regtien, P. P. L.: Measurement science for engineers. London, Kogan Page Science, 2004, ISBN 1-9039-9658-9
[3] Witte,R.A.: Electronic Test Instruments. Analog and Digital Measurements. 2nd Edition. Prentice Hall PTR, 2002, ISBN 0-13-066830-3

Požadavky:

Poznámka:

Rozsah výuky v kombinované formě studia: 14p+6l

Předmět je zahrnut do těchto studijních plánů:

Plán Obor Role Dop. semestr


Stránka vytvořena 28.3.2024 15:50:18, semestry: Z/2023-4, Z/2024-5, L/2023-4, připomínky k informační náplni zasílejte správci studijních plánů Návrh a realizace: I. Halaška (K336), J. Novák (K336)